MERAKI CW9164I-MR CLOUD MANAGED 802.11AX COMPATIBLE AP

Meraki CW9164I-MR Cloud Managed 802.11ax Compatible AP

• Two 2:2 and four 4:4 MU-MIMO 802.11ax, up to 7.5 Gbps tri-radio aggregate frame rate
• 2.4 GHz, 5 GHz, and 6 Ghz radios; dual-band scanning radio; Bluetooth® Low Energy/IoT radio
• Full-time Wi-Fi location tracking
• PoE: 802.3at and .3bt compliant
• USB 2.0 connector

Meraki CW9164I-MR data sheet

Meraki CW9164I-MR specifications:

1. Radios

   4 GHz 802.11b/g/n/ax client access radio
   5 GHz 802.11a/n/ac/ax client access radio
   6 GHz 802.11ax client access radio
   2.4 GHz, 5 GHz, and 6 GHz tri-band Air Marshal WIDS/WIPS, spectrum analysis, & location analytics radio
   2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support Concurrent operation of all five radios
   Supported frequency bands (country-specific restrictions apply):
   Tri-band mode:
   2.412-2.484 GHz ISM
   5.150-5.250 GHz (UNII-1)
   5.250-5.350 GHZ (UNII-2)
   5.470-5.600, 5.660-5.725 GHz (UNII-2e)
   5.725 -5.825 GHz (UNII-3)
   5.925 to 6.425 GHz (UNII-5)
   6.425 to 6.525 GHz (UNII-6)
   6.525 to 6.875 GHz (UNII-7)
   6.875 to 7.125 GHz (UNII-8)

2. Antenna

Integrated omnidirectional antennas
2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth
5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
5 GHz: (XOR) Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
6 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth
802.11 ax compatible, 802.11ac Wave 2, and 802.11n Capabilities
UL/DL-OFDMA
Target Wait Time (TWT)
BSS coloring*
SU-MIMO and DL MU-MIMO support
Maximal ratio combining (MRC)
802.11ax beamforming
20 and 40 MHz channels (802.11n)
20, 40, 80 MHz channels (802.11ac Wave 2)
20, 40, 80 and 160MHz channels (802.11ax)
Up to 1024-QAM on 2.4 GHz, 5 GHz, and 6 GHz bands
Packet aggregation – A-MPDU (transmit and receive), A-MSDU (transmit and receive)

3. Power

   Power over Ethernet: 42.5 – 57 V (PoE+ and UPoE compliant)
   DC Power Adapter (54V)
   Power consumption: 30W to 50W (UPoE)
   Minimum power requirement: 30W (PoE+, USB is disabled)
   Power over Ethernet injector and DC adapter sold separately

4. Interfaces

   1x 100/1000/2.5G BASE-T Ethernet (RJ45)
   1x DC power connector (5.5 mm x 2.5 mm, center positive)
   USB 2.0 at 4.5W
   Console – Only available in DNA Persona
   Environmental Interfaces – Only available in DNA Persona

5. Mounting

   All Cisco standard mounting hardware supported (AIR-AP-BRACKET-2 included)
   Desktop, ceiling, and wall mount capable
   Ceiling tile rail (9/16, 15/16, or 1 ½” flush or recessed rails), assorted cable junction boxes

6. Physical security

   Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
   Kensington lock

7. Environment

   Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
   Nonoperating (storage) altitude test: 25˚C (77°F) at 15,000 ft (4600 m)
   Operating temperature: 32° to 122°F (0° to 50°C)
   Operating humidity: 10% to 90% (non-condensing)
   Operating altitude test: 40˚C (104°F) at 9843 ft (3000 m)

8. Reliability

   Mean Time Between Failure (MTBF): 998,440 hrs at +25°C operating temperature

9. Physical Dimensions

   5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm)
   Weight: 3.54 lb. (1.60 kg)

10. Security

Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP*, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal*, WPA3 – Enterprise*, WPA3 – Enhanced Open (OWE)*
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing

11. Quality of Service

    Advanced Power Save (U-APSD)
    WMM Access Categories with DSCP and 802.1p support
    Layer 7 application traffic identification and shaping

12. Mobility

    PMK, OKC, & 802.11r for fast Layer 2 roaming
    Distributed or centralized layer 3 roaming

13. Analytics

    Embedded location analytics reporting and device tracking
    Global L7 traffic analytics reporting per network, per device, & application

14. LED Indicators

    One power/booting/firmware upgrade status

15. Regulatory

    RoHS
    For additional country-specific regulatory information, please contact Meraki sales

16. Warranty

    Lifetime hardware warranty with advanced replacement included

17. Ordering Information

    CW9164I-MR: Meraki CW9164I Cloud Managed 802.11ax Compatible AP
    MA-PWR-50WAC: Meraki AC Adapter for MR Series (power cable separate SKU)
    MA-INJ-6: Meraki Multigigabit 802.3bt Power over Ethernet Injector (power cable separate SKU)
    Cisco AIR-PWRINJ-6 802.3at
    Cisco AIR-PWRINJ-7 802.3bt
    Power cord – MA-PWR-CORD-XX (XX Country Code) should be ordered separately for the AC adapter and Ethernet injector
    Mounting bracket: AIR-AP-BRACKET-1 and AIR-AP-BRACKET-2(bundled)
    Meraki access point license required