MERAKI MR36H-HW
Meraki MR36H-HW Wi-Fi 6 Cloud Managed AP
- – Integrated three-port gigabit switch with POE passthrough
- – Three radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
- – Integrated Bluetooth® Low Energy radio
- – Two MU-MIMO 802.11ax Wi-Fi 6 radios
- – Up to 1.7 Gbps aggregate dual-band frame rate, 802.3af PoE compatible
Meraki MR36H-HW Wi-Fi 6 Cloud Managed AP
- Integrated three-port gigabit switch with POE passthrough
- Three radios: 2.4 GHz, 5 GHz, and dual-band WIDS/WIPS
- Integrated Bluetooth® Low Energy radio
- Two MU-MIMO 802.11ax Wi-Fi 6 radios
- Up to 1.7 Gbps aggregate dual-band frame rate, 802.3af PoE compatible
Specifications:
| Category | Specifications |
| Radios | 2.4 GHz 802.11b/g/n/ax client access radio |
| 5 GHz 802.11a/n/ac/ax client access radio | |
| 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio | |
| 2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support | |
| Concurrent operation of all four radios | |
| Supported frequency bands (country-specific restrictions apply) | |
| Supported frequency bands (country-specific restrictions apply): | |
| 2.412-2.484 GHz | |
| 5.150-5.250 GHz (UNII-1) | |
| 5.250-5.350 GHZ (UNII-2) | |
| 5.470-5.600, 5.660-5.725 GHz (UNII-2e) | |
| 5.725 -5.825 GHz (UNII-3) | |
| Antenna | Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz) |
| 802.11ax, 802.11ac Wave 2 and 802.11n Capabilities | DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring** |
| 2 x 2 multiple input, multiple output (MIMO) with two spatial streams | |
| SU-MIMO, UL MU-MIMO** and DL MU-MIMO support | |
| Maximal ratio combining (MRC) & beamforming | |
| 20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax) | |
| Up to 1024-QAM on both 2.4 GHz & 5 GHz bands | |
| Packet aggregation | |
| Power | Power over Ethernet: 37 – 57 V (802.3at compatible) |
| Power consumption: 30W max (802.3at). Note: actual power consumption may vary depending on the AP usage. | |
| Power over Ethernet injector sold separately | |
| Note: Actual power consumption may vary depending on the AP usage. | |
| Interfaces | 1x 10/100/1000 BASE-T Ethernet (RJ45) (Uplink on the back) |
| 1x 10/100/1000 BASE-T Ethernet (RJ45) with 802.3af Power over Ethernet output | |
| 2x 10/100/1000 BASE-T Ethernet (RJ45) outputs | |
| 1x Passthrough port (non-managed). | |
| Mounting | All standard mounting hardware included |
| Desktop, ceiling, and wall mount capable | |
| Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes | |
| Bubble level on mounting cradle for accurate horizontal wall mounting | |
| Physical Security | Two security screw options (included) (10 mm long and 2.5 mm diameter and 4.7 mm head) |
| Kensington lock hard point | |
| Environment | Operating temperature: 32 °F to 104 °F (0 °C to 40 °C) |
| Humidity: 5 to 95% non-condensing | |
| Operating altitude: Up to 40,000 feet (12,192 meters) | |
| Reliability | Mean Time Between Failure (MTBF): 257,215hrs at +25°C operating temperature |
| Physical Dimensions | 15.5 cm x 11 cm x 2.3 cm (6.1″ x 4.33″x 0.9″) not including desk mount feet or mount plate |
| Weight: 17.35 oz (492 g) | |
| Security | Integrated Layer 7 firewall with mobile device policy management |
| Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal | |
| Flexible guest access with device isolation | |
| VLAN tagging (802.1q) and tunneling with IPsec VPN | |
| PCI compliance reporting | |
| WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 – Personal, WPA3 – Enterprise, WPA3 – Enhanced Open (OWE)** | |
| EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM | |
| TKIP and AES encryption | |
| Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration | |
| Cisco ISE integration for Guest access and BYOD Posturing | |
| Quality of Service | Advanced Power Save (U-APSD) |
| WMM Access Categories with DSCP and 802.1p support | |
| Layer 7 application traffic identification and shaping | |
| Mobility | PMK, OKC, & 802.11r for fast Layer 2 roaming |
| Distributed or centralized layer 3 roaming | |
| Analytics | Embedded location analytics reporting and device tracking |
| Global L7 traffic analytics reporting per network, per device, & per application | |
| LED Indicators | 1 power/booting/firmware upgrade status |
| Regulatory | RoHS |
| For additional country-specific regulatory information, please contact Meraki sales | |
| Warranty | Lifetime hardware warranty with advanced replacement included |
| Ordering Information | MR36H-HW: Meraki MR36H Cloud Managed 802.11ax AP |
| MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU) | |
| Note: Meraki access point license required. |
Be the first to review “MERAKI MR36H-HW”
Related products
Cisco Meraki
Cisco Meraki
Cisco Meraki
Cisco Catalyst C1000
10.870.000 ₫
Cisco Catalyst C1200
23.605.000 ₫
Cisco Catalyst C1000
28.700.000 ₫
Cisco Catalyst C1200
16.670.000 ₫
Reviews
There are no reviews yet.